PESTERCHUM 3.41: The ride never stops edition

Got an fandom-related project, site, or theme? Want to start one? Looking for fan meetups in your area? Post in here.
Post Reply
User avatar
lavendersiren
Posts: 151
Joined: Wed Dec 25, 2019 3:09 am
Location: starter planet
Pronouns: they/them
Classpect: Mage of Light
Moon: Derse
Contact:

Re: PESTERCHUM 3.41: The ride never stops edition

Post by lavendersiren » Thu Aug 06, 2020 2:41 am

Junkguy, I've given the possible answers that I know, I can't figure out anything further than that.
Sassmaster, here's a link to a python script that can be used for gradient quirks:
Do note it might be kinda difficult to install but it should have enough instructions in there.
Image Image

aijpg
Posts: 1
Joined: Mon Aug 10, 2020 12:58 am
Pronouns: she/he/they

Re: PESTERCHUM 3.41: The ride never stops edition

Post by aijpg » Mon Aug 10, 2020 1:04 am

pesterchum wont open ;v;
here's the debuglog:

Code: Select all

=== PESTERCHUM DEBUG 08-10-20 00-42 ===
Qt: Untested Windows version 6.2 detected!
Registered quirks: upper(), lower(), scramble(), reverse()
Traceback (most recent call last):
  File "<string>", line 2912, in <module>
  File "<string>", line 2604, in __init__
  File "<string>", line 937, in __init__
  File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/profile", line 104, in __init__
  File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/profile", line 362, in __init__
IOError: [Errno 2] No such file or directory: u'C:\\Users\\thinkpad\\AppData\\Local\\pesterchum/profiles/alienWaifu.js'
sadly, i've looked for the file location and the "/profiles/" folder is... not there! same with the ".js" file. not sure what to do from here :distraught:

Teyder Captor
Posts: 4
Joined: Mon Aug 10, 2020 5:53 pm

Re: PESTERCHUM 3.41: The ride never stops edition

Post by Teyder Captor » Mon Aug 10, 2020 6:19 pm

Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me

chiffonRoses
Posts: 3
Joined: Thu Aug 13, 2020 12:49 am
Pronouns: she/her, they/them

Re: PESTERCHUM 3.41: The ride never stops edition

Post by chiffonRoses » Thu Aug 13, 2020 12:51 am

Teyder Captor wrote:
Mon Aug 10, 2020 6:19 pm
Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me
I'm having the same issue

User avatar
deans67impala
Posts: 1
Joined: Thu Aug 13, 2020 1:52 pm
Pronouns: any
Classpect: Prince of Doom
Moon: Derse

Re: PESTERCHUM 3.41: The ride never stops edition

Post by deans67impala » Thu Aug 13, 2020 2:45 pm

okay. okay. so i just figured something out, after searching for months for an answer.

PESTERCHUM SCALING FIX (FOR WINDOWS)

i have no idea how to format this/pin this because i havent been on these forums in YEARS, but i figured out how to scale pesterchum correctly to make it readable on windows machines. found it out after finding no fix online, other than changing the theme (which on my surface pro 6, didnt work. it was still small as shit, and unusable -- and ive got 20/20 vision too.)

but anyway -- pesterchum window too small? i finally figured this shit out. i made it HAPEN.

right-click on pesterchum.exe, wherever it may be, and select "properties".

under "settings", check "disable fullscreen optimizations", then click on "change high DPI settings". then select "override high DPI scaling behavior", and on the drop-down, select "system (enhanced)"

and thats it! this fix worked for me on windows 10, not sure about previous versions. hope this helps someone who's got the same problem!

happy pestering! :perky:

Teyder Captor
Posts: 4
Joined: Mon Aug 10, 2020 5:53 pm

Re: PESTERCHUM 3.41: The ride never stops edition

Post by Teyder Captor » Fri Aug 14, 2020 2:03 am

chiffonRoses wrote:
Thu Aug 13, 2020 12:51 am
Teyder Captor wrote:
Mon Aug 10, 2020 6:19 pm
Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me
I'm having the same issue
have you achieved a solution?

chiffonRoses
Posts: 3
Joined: Thu Aug 13, 2020 12:49 am
Pronouns: she/her, they/them

Re: PESTERCHUM 3.41: The ride never stops edition

Post by chiffonRoses » Fri Aug 14, 2020 3:52 am

Teyder Captor wrote:
Fri Aug 14, 2020 2:03 am
chiffonRoses wrote:
Thu Aug 13, 2020 12:51 am
Teyder Captor wrote:
Mon Aug 10, 2020 6:19 pm
Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me
I'm having the same issue
have you achieved a solution?
Unfortunately, I have not

ZanTheHSfan
Posts: 1
Joined: Sun Aug 16, 2020 6:47 pm

pesterchum problem

Post by ZanTheHSfan » Sun Aug 16, 2020 6:57 pm

i was using pesterchum for a while and then one day it just didn't work as in i couldn't open it

here is the debug-log

=== PESTERCHUM DEBUG 08-14-20 21-00 ===
Qt: Untested Windows version 6.2 detected!
Registered quirks: upper(), lower(), scramble(), reverse()
Traceback (most recent call last):
File "<string>", line 2912, in <module>
File "<string>", line 2604, in __init__
File "<string>", line 937, in __init__
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/profile", line 101, in __init__
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/json", line 267, in load
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/json", line 307, in loads
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/json.decoder", line 322, in decode
ValueError: Extra data: line 1 column 485 - line 1 column 507 (char 485 - 507)

hope somebody can help- thank you

User avatar
lavendersiren
Posts: 151
Joined: Wed Dec 25, 2019 3:09 am
Location: starter planet
Pronouns: they/them
Classpect: Mage of Light
Moon: Derse
Contact:

Re: PESTERCHUM 3.41: The ride never stops edition

Post by lavendersiren » Mon Aug 17, 2020 12:08 am

At this point I just want an actual tech support person to show up to this forsaken thread because these issues are entirely beyond my expertise and I'm tired of feeling like I'm obligated to fix them.
Image Image

Teyder Captor
Posts: 4
Joined: Mon Aug 10, 2020 5:53 pm

Re: PESTERCHUM 3.41: The ride never stops edition

Post by Teyder Captor » Fri Aug 21, 2020 8:03 pm

chiffonRoses wrote:
Thu Aug 13, 2020 12:51 am
Teyder Captor wrote:
Mon Aug 10, 2020 6:19 pm
Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me
I'm having the same issue
got damn! How about now, have you managed to enter?

Teyder Captor
Posts: 4
Joined: Mon Aug 10, 2020 5:53 pm

Re: PESTERCHUM 3.41: The ride never stops edition

Post by Teyder Captor » Fri Aug 21, 2020 8:12 pm

arcaneAgilmente wrote:
Sat Dec 21, 2019 5:46 pm
BrobyDDark wrote:
Sat Dec 21, 2019 5:39 pm
So it returns. Whatever happened to ghostDunk? Did he drop the project after the og MSPAF died?
He hasn't even logged into the server since at least 2014 so I've no actual clue.
hey i need help, please answer

chiffonRoses
Posts: 3
Joined: Thu Aug 13, 2020 12:49 am
Pronouns: she/her, they/them

Re: PESTERCHUM 3.41: The ride never stops edition

Post by chiffonRoses » Fri Aug 21, 2020 9:14 pm

Teyder Captor wrote:
Fri Aug 21, 2020 8:03 pm
chiffonRoses wrote:
Thu Aug 13, 2020 12:51 am
Teyder Captor wrote:
Mon Aug 10, 2020 6:19 pm
Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me
I'm having the same issue
got damn! How about now, have you managed to enter?
I got in at one point, it was connected and everything, but now i cant get it to open at all

silverCandyshop
Posts: 1
Joined: Sun Aug 23, 2020 11:05 pm
Location: NUNYA
Pronouns: she/her
Classpect: SPACE

Re: PESTERCHUM 3.41: The ride never stops edition

Post by silverCandyshop » Sun Aug 23, 2020 11:09 pm

pesterchum wont open, though it did earlier. :bemused: ive tried opening it/pinning it to taskbar and opening it/running as admin, but nothing works. i tried uninstalling+reinstalling but nothing worked. any tips/solutions?

MushroomDance
Posts: 3
Joined: Mon Aug 24, 2020 12:10 pm
Pronouns: he/they
Classpect: Rouge of Heart
Moon: Prospit

Re: PESTERCHUM 3.41: The ride never stops edition

Post by MushroomDance » Mon Aug 24, 2020 1:35 pm

I've been having the same problem as well! I've re-downloaded PesterChum several times now just in case it had to do with the way how I downloaded it, but it still doesn't want to start up?
idk what I'm doing man

cicatrizerObscura
Posts: 3
Joined: Mon Aug 24, 2020 9:43 pm

Re: PESTERCHUM 3.41: The ride never stops edition

Post by cicatrizerObscura » Mon Aug 24, 2020 10:13 pm

I cannot connect at all despite having a couple friends able to connect just fine, what is going on?!
I also got this message and I have no idea what it means
Image

cicatrizerObscura
Posts: 3
Joined: Mon Aug 24, 2020 9:43 pm

Re: PESTERCHUM 3.41: The ride never stops edition

Post by cicatrizerObscura » Mon Aug 24, 2020 10:30 pm

I don't know, is this thing just completely abandoned?

squareDigiwatch
Posts: 1
Joined: Wed Aug 26, 2020 5:46 pm
Pronouns: He/Him

Re: PESTERCHUM 3.41: The ride never stops edition

Post by squareDigiwatch » Wed Aug 26, 2020 5:49 pm

Is Pesterchum still down?I got on yesterday but today when i tried to get on it won't open.

MushroomDance
Posts: 3
Joined: Mon Aug 24, 2020 12:10 pm
Pronouns: he/they
Classpect: Rouge of Heart
Moon: Prospit

Re: PESTERCHUM 3.41: The ride never stops edition

Post by MushroomDance » Wed Aug 26, 2020 6:39 pm

I'm going to try and re-download Pesterchum to see if it'll still work or not. I'll update you guys once I try to run it
idk what I'm doing man

MushroomDance
Posts: 3
Joined: Mon Aug 24, 2020 12:10 pm
Pronouns: he/they
Classpect: Rouge of Heart
Moon: Prospit

Re: PESTERCHUM 3.41: The ride never stops edition

Post by MushroomDance » Wed Aug 26, 2020 7:20 pm

Okay so, I downloaded the Portable version of Pesterchum for Windows and its working well! I still have to play around with everything to see if its still working
idk what I'm doing man

SixMinusSix
Posts: 10
Joined: Fri Mar 13, 2020 6:32 am

Re: PESTERCHUM 3.41: The ride never stops edition

Post by SixMinusSix » Sun Aug 30, 2020 6:44 am

Anybody else getting Errno 10060? This started tonight for some reason. Are the servers down again?

Post Reply