Homestuck.XYZ 2.0

Junkguy, I've given the possible answers that I know, I can't figure out anything further than that.
Sassmaster, here's a link to a python script that can be used for gradient quirks:
Do note it might be kinda difficult to install but it should have enough instructions in there.

pesterchum wont open ;v;
here's the debuglog:
sadly, i've looked for the file location and the "/profiles/" folder is... not there! same with the ".js" file. not sure what to do from here

Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me

Teyder Captor wrote: ↑

Mon Aug 10, 2020 6:19 pm

Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me

I'm having the same issue

okay. okay. so i just figured something out, after searching for months for an answer.

PESTERCHUM SCALING FIX (FOR WINDOWS)

i have no idea how to format this/pin this because i havent been on these forums in YEARS, but i figured out how to scale pesterchum correctly to make it readable on windows machines. found it out after finding no fix online, other than changing the theme (which on my surface pro 6, didnt work. it was still small as shit, and unusable -- and ive got 20/20 vision too.)

but anyway -- pesterchum window too small? i finally figured this shit out. i made it HAPEN.

right-click on pesterchum.exe, wherever it may be, and select "properties".

under "settings", check "disable fullscreen optimizations", then click on "change high DPI settings". then select "override high DPI scaling behavior", and on the drop-down, select "system (enhanced)"

and thats it! this fix worked for me on windows 10, not sure about previous versions. hope this helps someone who's got the same problem!

happy pestering!

chiffonRoses wrote: ↑

Thu Aug 13, 2020 12:51 am

Teyder Captor wrote: ↑

Mon Aug 10, 2020 6:19 pm

Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me

I'm having the same issue

have you achieved a solution?

Teyder Captor wrote: ↑

Fri Aug 14, 2020 2:03 am

chiffonRoses wrote: ↑

Thu Aug 13, 2020 12:51 am

Teyder Captor wrote: ↑

Mon Aug 10, 2020 6:19 pm

Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me

I'm having the same issue

have you achieved a solution?

Unfortunately, I have not

i was using pesterchum for a while and then one day it just didn't work as in i couldn't open it

here is the debug-log

=== PESTERCHUM DEBUG 08-14-20 21-00 ===
Qt: Untested Windows version 6.2 detected!
Registered quirks: upper(), lower(), scramble(), reverse()
Traceback (most recent call last):
File "<string>", line 2912, in <module>
File "<string>", line 2604, in __init__
File "<string>", line 937, in __init__
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/profile", line 101, in __init__
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/json", line 267, in load
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/json", line 307, in loads
File "c:\Users\Stephen\Documents\projects\build\build\pyi.win32\pesterchum\outPYZ1.pyz/json.decoder", line 322, in decode
ValueError: Extra data: line 1 column 485 - line 1 column 507 (char 485 - 507)

hope somebody can help- thank you

At this point I just want an actual tech support person to show up to this forsaken thread because these issues are entirely beyond my expertise and I'm tired of feeling like I'm obligated to fix them.

chiffonRoses wrote: ↑

Thu Aug 13, 2020 12:51 am

Teyder Captor wrote: ↑

Mon Aug 10, 2020 6:19 pm

Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me

I'm having the same issue

got damn! How about now, have you managed to enter?

arcaneAgilmente wrote: ↑

Sat Dec 21, 2019 5:46 pm

BrobyDDark wrote: ↑

Sat Dec 21, 2019 5:39 pm

So it returns. Whatever happened to ghostDunk? Did he drop the project after the og MSPAF died?

He hasn't even logged into the server since at least 2014 so I've no actual clue.

hey i need help, please answer

Teyder Captor wrote: ↑

Fri Aug 21, 2020 8:03 pm

chiffonRoses wrote: ↑

Thu Aug 13, 2020 12:51 am

Teyder Captor wrote: ↑

Mon Aug 10, 2020 6:19 pm

Hears! How about? Well I have this problem that pestercuhm says "F4il3d: Connection closed" I don't know how to fix it, I tried everything but nothing and even changing the ports and so on, but nothing at all for a solution UH, I would appreciate if you could help me

I'm having the same issue

got damn! How about now, have you managed to enter?

I got in at one point, it was connected and everything, but now i cant get it to open at all

pesterchum wont open, though it did earlier. ive tried opening it/pinning it to taskbar and opening it/running as admin, but nothing works. i tried uninstalling+reinstalling but nothing worked. any tips/solutions?

I've been having the same problem as well! I've re-downloaded PesterChum several times now just in case it had to do with the way how I downloaded it, but it still doesn't want to start up?

I cannot connect at all despite having a couple friends able to connect just fine, what is going on?!
I also got this message and I have no idea what it means

I don't know, is this thing just completely abandoned?

Is Pesterchum still down?I got on yesterday but today when i tried to get on it won't open.

I'm going to try and re-download Pesterchum to see if it'll still work or not. I'll update you guys once I try to run it

Okay so, I downloaded the Portable version of Pesterchum for Windows and its working well! I still have to play around with everything to see if its still working

Anybody else getting Errno 10060? This started tonight for some reason. Are the servers down again?